- Fat, Flasker m/tilbehør
Monster Mill MM-2
MONSTER BREWING MM-2 (3/8" shaft for drill)
Knuser ca 3 kg/min
6" lang, 2 ruller, Justerbar knuseåpning.
Laget i stål 1144
Drives med drill, ikke inkludert.
Trakt ikke inkludert.
Brukermanual på Engelsk finner du her.
Monster Brewing Hardware sier:
Introducing the newest player in the home brewer mill market. This is a fresh design meant to compete and win against the best milling products available. It consists of a 6061 aluminum block frame with two 6" long steel rollers riding on SAE 841 oil impregnated bronze bushings. We use a superior grade of steel that is much harder than what is found on most comparable products and should last almost twice as long. The drive shaft, and all the axles are integral to the roller rather than screwed into the ends. This makes it fine to drive the mill clockwise, or counter-clockwise. All the axles are 3/8", with minimal freeplay in the bushings. With 20% more roller surface area than brand "C" and 44% more than brand "B", you'll get more throughput with the same drive speed, in either direction!
One of the knurled steel rollers is driven by a standard 3/8" electric drill (not included) to feed the grain through the adjustable gap and crush the grist. Both ends of the non-driven roller ride in bushings that are offset mounted in an adjustable knob. The knob is held in a fixed position by a set-screw that you can loosen to adjust the mill. This system provides an adjustment range of .070". Our knobs are made from 303 stainless steel for excellent durability, and are larger in diameter than the competition, as well as knurled for a positive grip. We've also added a groove in our newest design knobs with a matching rounded head on the thumbscrew that allows for a much better grip on the knob to avoid gap changes while milling, and also providing knob retention.
If you don't purchase our base and hopper, you will need to fabricate one to feed the grist through the mill. The mill can be mounted above or below the base and attached using the included mounting bolts.
There are two roller material options available for the standard 1.5" mills. They come standard with 1144 alloy steel, which offers fantastic wear for home brewers. Plain steel mills kept indoors, and used regularly won't have rust issues. Non climate controlled areas, or minimal usage could see some corrosion come up that is easily removed with a wire brush. As an upgrade to 1144 steel we offer 303 Stainless Steel. It will wear just about the same as our 1144 steel, but will not rust. Recommended for those that live in salty or moist environments, and those that want to wet mill.
Kunder kjøpte også
Castle Malting Vienna Malt EBC 5 - 7 Brukes i alle typer Vienna Lager øl....17,00
Castle Malting Crystal EBC 150 Malten har en caramel-kobberaktig farge og gir en rik...3,00
Alle slanger er godkjent for næringsmidler. Pris pr meter.10,00
Lindr KONTAKT 40/K Green Line Green Line kjølerne er ikke bare mer...9.680,00
CO2-regulator Sodastream regulerbar opp til 90 psi ( 6,2 BAR ) 1 BAR = 14,5 psi...550,00